Random good picture Not show

61 The authors analyzed the influential factors of flow rate and the relationship between flow rate and pressure limiting and hence proposed a set of typical presetting injection parameters.

62 The effects on flux of tangential flow rate, time, pressure and temperature were investigated.

63 The simulated result of bubble diameter agrees with the calculated in the low gas flow rate satisfactorily.

64 The results show that when the porous media model is not used, the calculated escape velocity of bubbles is larger, and the difference becomes larger with increasing the gas flow rate.

65 The main influence factors of corn stalk combustion in a fixed bed are corn stalk length, air preheating, the primary air flow rate and fuel moisture.

66 The effects of perfusion volume, flow rate, perfusion concentration on nasal absorption of analgin were studied.

67 The flow rate control level is focused and the simple engineering approximation of the original problem proposed by other scholars is discussed.

68 In addition,(sentencedict.com) we have speculated on a new mechanism for the action of hydroxychloroquine leading to an improvement in salivary flow rate.

69 The pulverized coal mass rate increases as the gas flow rate increases.

70 Testing results show that the major factors affecting the deposition efficiency are the welding current, arc voltage and gas flow rate under the condition of same circuit inductance.

71 A mathematical model for well testing analysis, which takes wellbore storage and skin effects in consideration, is proposed for variable flow rate with infinite outer boundary.

72 NLF 9 provides better - average flow rate and consequently lower pressure loss.

73 This article introduced a way to turn the flow rate value at the measuring state to the value at the indus- trial standard state when measuring the flow rate with glass rotameter in the fire test.

74 When total heating power P or cooling water flow rate Q increases, heat transfer performance of the heat pipe cold plate is enhanced and R(subscript th) decreases under experimental tilt obliquities.

75 Through experiments of changing the inlet air flow rate, we can adjust the hot air outlet temperature as high as possible, which helps to reduce the heat loss and improve the collector efficiency.

76 Positioning function of the PLC and servo positioning module was utilized to control valve position and regulate glycerol flow rate in real-time, according to the tow speed.

77 A conclusion, which is that flow reverse will be retarded in a road with more length and higer initial flow rate, is first put forword.

78 The unsteady effects of the coolant flow rate and rotating speed on fluid flow and heat transfer were investigated experimentally by employing a rotating heat transfer test rig.

79 To ensure the purity grade and flow rate of shielding inert gas, to use tungsten electrode activated with nanosized thoria are two better ways to decrease the erosion rate of electrode.

80 An analysis mathematical model of well testing is proposed for inconstant flow rate with the closed outer boundary and the wellborn storage and the skin effects.

81 With a big flow rate, it is suitable for the use of plain river network area and hilly irrigation and drainage, piscina water supply and drainage industrial water supply and drainage.

82 Reduction of energy losses in hydraulic circulation of a hydraulic machine when its running idle can be brorght about by lowering the no-load circulatory flow rate.

83 The air flow rate around stripped rotor was analyzed and studied. The velocity decreased with the increasing of the radius and the direction was perpendicular with the direction of radius.

84 Effects of major parameters (equivalence ratio, flow rate and half cycle) on the NO, CO emission were observed and analyzed.

85 The water flow velocity in the suction pipe, which is crucial for evaluating the performance on pumping fish, can be measured by the pumped water flow rate of the riser in an air lift pump system.

86 Effects of different configurations of the submerged nozzles, the pool height and flow rate (drawing speed) on the fluctuation of the flow level have been empathetically analyzed. The experimental...

87 At a low flow rate, fluid merely percolates through the void spaces between stationary particles.

88 Stainless steel is adopted as material for nozzles, inner or outer or side cooling rings, each of which is equipped which pressure indicator and flow rate adjusting valve.

89 Main factors affecting on liquid holdup are pressures, pipeline diameters and gas & liquid flow rate.

90 Some conditions , such as vaporization temperature, detection temperature and gas flow rate, etc. were also discussed.